Indesit VIS 640 C Instruções de Utilização descarregar pdf (Página 6)

DAILY USE

SWITCHING THE HOB ON/OFF

To switch the hob on, press the button for approx. 2 seconds until

the cooking zone displays light up. To switch o, press the same button

until the displays switch o. All the cooking zones are deactivated.

If the hob has been in use, the residual heat indicator “H” remains lit until

the cooking zones have cooled down.

If within 10 seconds of switching on, no function is selected, the hob

switches o automatically.

SWITCHING ON AND ADJUSTING COOKING ZONES

Place the pot on the cooking zone, switching the hob on, activate the

required cooking zone by pressing the corresponding “+” button. “0” appears

on the display. It is possible to select the required power level, from min. 0 to

max. 9, or booster “P” if available. To increase the power level, push the “+”

button. To decrease the power level push the “−” button.

DEACTIVATION OF COOKING ZONES

To switch o the cooking zone, press the corresponding “+” and “

−

”

button for more than 3 seconds.

The cooking zone switches o and, if still hot, the letter “H” appears on

the zone display.

CONTROL PANEL LOCK

This function locks the controls to prevent accidental activation of the

hob. To activate the control panel lock, switch the hob on and press the

Lock function button for three seconds; an acoustic signal and a luminous

indicator near the padlock symbol signal activation. The control panel is

locked except for the switching o function. To deactivate the control

lock, repeat the activation procedure. The luminous dot goes o and

the hob is active again.

The presence of water, liquid spilled from pots or any objects resting on

the button below the symbol can accidentally activate or deactivate the

control panel lock.

TIMER

The timer can be used to set the cooking time for a maximum of 99

minutes (1 hour and 39 minutes) for all the cooking zones.

Select the cooking zone to be used with the timer, press the timer (see

gure) and a beep signals the function. The display shows “00” and

the LED indication comes on. The Timer value can be decreased and

increased by keeping the slider function “+” and “-” buttons pressed.

When the set time has elapsed, an acoustic signal sounds and the

cooking zone switches o automatically. To deactivate the timer, keep

the Timer button pressed for at least 3 seconds.

To set the timer for another zone, repeat the above steps. The timer

display always shows the timer for the selected zone or the shortest

timer.

To modify or deactivate the timer, press the cooking zone selection

button for the timer in question.

Power indicator display

Selected cooking zone indication

Cooking zone positioning

Slider operation

Increase power level

Decrease power level

SPECIAL FUNCTIONS

Some models have special functions:

AUTOMATIC FUNCTION

The function automatically sets a power level suitable for maintaining

a low boil. Activate this function after bringing to the boil, pressing the

corresponding zone button rst and then the button .

RESIDUAL HEAT INDICATOR

The hob is tted with a residual heat indicator for each cooking zone.

These indicators alert the user when cooking zones are still hot.

If the display shows , the cooking zone is still hot. If the residual

heat indicator of a given cooking zone is lit, that zone can be used, for

example, to keep a dish warm or to melt butter.

When the cooking zone cools down, the display goes o.

INCORRECT OR MISSING POT INDICATOR

If you are using a pot that is not suitable, not correctly positioned or

not of the correct dimensions for your induction hob, the message “no

pot” will appear in the display (see gure at side). In these situations it

is recommended to reposition the pot on the hob surface until you nd

the position of operation. If no pot is detected within 60 seconds, the

hob switches o.

FAST BOIL FUNCTION BOOSTER 

This function, only present on some cooking zones, makes it possible

to exploit the hob’s maximum power (for example to bring water to the

boil very quickly).

To activate the function, press the “+” button until “P” appears on the

display. After 5 minutes’ use of the booster function, the appliance

automatically sets the zone to level 9.

ACTIVATION/DEACTIVATION OF THE ACOUSTIC SIGNAL

After switching the hob on, press and hold the “

−

” of the rst cooking

zone and the external button on the right simultaneously for at least

ve seconds (“as shown below”).

5 Sec

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Indesit VIS 640 C Instruções de Utilização Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Indesit VIS 640 C