Indesit PI 950 AST (IX) EX Instruções de Utilização descarregar pdf (Página 12)

 Before operating your new appliance please read

this instruction booklet carefully. It contains important

information for safe use, installation and care of the

appliance.

 Please keep these operating instructions for future

reference. Pass them on to possible new owners of

the appliance.

Positioning

 Keep packaging material out of the reach of

children. It can become a choking or suffocation

hazard (see Precautions and tips).

 The appliance must be installed by a qualified

professional according to the instructions provided.

Incorrect installation may cause harm to people and

animals or may damage property.

a. If the cabinet(s) located next to the cooktop are

higherthan the cooktop itself, the cabinet(s) must

be installedat least 100 mm from the edge

cooktop;

b. Hoods must be installed in accordance with

theinstructions contained in the installation manual

for thehoods themselves, and no less than 650

mm from thecooktop;

c. In the case of the 900 mm cooker hoods,

besidesfollowing the recommendations in point

b., the cabinetsshould be positioned next to the

hood at a height of atleast 540 mm from the top .

The cabinet should alwaysbe installed at a height

from the top which allows easyuse of pots and

pans on the cooker.

d. Should the cooktop be

installed directly under

acupboard, the latter should

be at least 700

mm(millimetres) from the top,

as shown in Figure.

e. The dimensions of the cutout for the appliance

mustbe those indicated in the figure. Clamps are

providedto fasten the cooktop to counters

measuring from 20 to 40 mm in thickness. To

fasten the cooktop securely, itis recommended

that all the clamps be used.

840

480

mm (MIN)

Fixing to the housing unit

Proceed with fixing to the housing unit as follows

(see figure):

 mount the hooks B, partly tightening the

provided screws A into the relative holes;

 position the provided sealing gasket X 5÷6 mm

from the edge of the installation hole, matching up

the two ends of the seal without overlapping;

 insert the hob into the hole,

making sure it is positioned

centrally and that the edge

adheres to the sealant;

 position the hooks B

correctly, as shown in figure

and then tighten the screws

A to hold them in place;

Connecting the gas

The appliance should be connected to a gas

cylinder in compliance with current directives.

Remember to install a pressure regulator on the LPG

cylinder, which complies with current directive.

! check that the supply pressure complies with the

values indicated in table 1 Characteristics of the

burners and nozzles since this will ensure safe

operation, correct consumption and ensure a longer

life to your appliance.

Connection with hose

Make the connection using a gas hose complying

with the the characteristics provided in current

directive. The internal diameter of the pipe used is

as follows:

- 8mm for liquid gas;

When installing the hose, remember to take the

following precautions:

Check that the hose fits firmly into place at the two

ends and fix it with clamps complying to current

directive.If any of the above recommendations can

Installation

600mm min.

540mm min.

700mm min.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comentários a estes Manuais

Sem comentários

Indesit PI 950 AST (IX) EX Instruções de Utilização Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com não Indesit PI 950 AST (IX) EX