Indesit PZF 950 T GH N /HA Instruções de Utilização descarregar pdf (Página 18)

Fig. 6

Fig. 8

Fig. 7

Adapting to different types of gas

To adapt the hob to a different type of gas other than the

default type (indicated by the label placed on the upper

part of the hob or on the packaging), the burner nozzles

should be replaced as follows:

 Remove the hob grids and slide the burners off their

seats.

 Unscrew the nozzles (Fig. 7) using a 7 mm socket

spanner, and replace them with nozzles for the new

type of gas (see table 1 Burner and nozzle

characteristics).

 Once this procedure is finished, replace the old rating

sticker with one indicating the new type of gas used.

Stickers are available from any of our Technical

Assistance Centres.

Setting the burners to minimum

 While the burner is lit, turn the tap to its minimum

setting.

 Remove the knob (Fig. 8) and use a screwdriver to fine-

tune the adjustment screw inside the tap pin, until the

flame is small but steady (the minimum setting will

increase if the screw is loosened, and will decrease if it

is tightened).

N.B.: if the appliance is conne

cted to liquid gas, the

adjustment screw must be fastened as tightly as

possible.

 Having adjusted the flame to the required low setting,

while the burner is alight, quickly change the position of

the knob from minimum to maximum and vice versa

several times, making sure that the flame is not

extinguished.

Electrical connection

THE EQUIPMENT MUST BE EARTHED

CORRECTLY.

The hobs are designed for operation with an alternating

current at the power supply voltage and frequency

indicated on the data plate (this is located underneath the

hob; alternatively the information may be found at the end

of the instruction manual). Make sure that the local power

supply voltage value is the same as the value indicated

on the data plate.

Gas connection

 Connection to gas piping or the gas canister should be

performed in accordance with current legislation (UNI-

CIG 7129 and 7131) only after ensuring that the

appliance is suitable for use with the type of gas

supplied.

 This appliance is designed for operation with the type

of gas indicated on the label (this can be found on the

hob). If the gas supplied is not the same type as

indicated for the appliance, replace the relevant

nozzles (supplied) while consulting the paragraph

Adapting to different types of gas.

 For safe operation, to ensure more efficient energy use

and to increase the durability of the appliance, make

sure that the supply pressure adheres to the values

listed in table 1 Burner and nozzle specifications.

Alternatively, fit a suitable pressure regulator to the inlet

hose in accordance with standard UNI-CIG 7430.

 Perform the connection in such a way that the

appliance is not subjected to any kind of strain.

Connect it to the adjustable pipe fitting (½G male

threaded), located on the rear right-hand side of the

appliance (Fig. 6), using a rigid metal pipe with fittings

which conform to the UNI-CIG 7129 standard, or using a

flexible jointless metal hose which conforms to regulation

UNI-CIG 9891 and which should be no longer than 2000

mm. The seal must always be replaced after rotating the

pipe fitting (seal supplied with the appliance). When the

installation process is complete, make sure that the seals

for the gas circuit, the internal connections and the valves

are in perfect condition, using a soapy solution (never use

a flame). Make sure that the connection hose cannot

come into contact with moving parts which could damage

it or crush it. Make sure that the natural gas piping is

suitable for supplying the appliance when all the burners

are operating.

 To perform connection for liquid gas (in a canister), fit a

pressure regulator which conforms to standard UNI-CIG

7432-75 and subsequent modifications.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Comentários a estes Manuais

Sem comentários

Indesit PZF 950 T GH N /HA Instruções de Utilização Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Indesit PZF 950 T GH N /HA