Indesit CISHB 10 A.1 IX Instruções de Utilização descarregar pdf (Página 8)

Fitting on a Power Supply Cable

Opening the terminal board:

• Using a screwdriver, prise on the side tabs of the

terminal board cover;

• Pull open the cover of the terminal board.

To install the cable, proceed as follows:

• unscrew the wire clamp screw and the contact screws

Note: the jumpers are factory-set for a three-phase

400V connection (fig. D).

• to make the electrical connections illustrated in fig. F

and fig. G, use the two jumpers housed in the box (fig.

E - reference “P”)

• fasten the supply cable in place with the clamp and

close the cover of the terminal board.

Fig. D

Fig. E

Fig. F

Fig. G

Connecting the supply cable to the mains

Install a standardised plug corresponding to the load indi-

cated on the data plate. When connecting the cable di-

rectly to the mains, install an omnipolar circuit-breaker with

a minimum contact opening of 3 mm between the appli-

ance and the mains. The omnipolar circuit breaker should

be sized according to the load and should comply with

current regulations (the earth wire should not be inter-

rupted by the circuit breaker).

The supply cable should be positioned so that it does not

reach a temperature of more than 50°C with respect to

the room temperature, anywhere along its length.

Before making the connection, check that:

• The electrical safety of this appliance can only be guar-

anteed if the cooker is correctly and efficiently earthed,

in compliance with regulations on electrical safety. Al-

ways ensure that the earthing is efficient; if you have

any doubts call in a qualified technician to check the

system. The manufacturer declines all responsibility

for damage resulting from a system which has not been

earthed.

• Before plugging the appliance into the mains, check

that the specifications indicated on the date plate (on

the appliance and/or packaging) correspond to those

of the electrical mains system of your home.

BUILT-IN HOB

BUILT-IN COOKER

WHITERED

YELLOW

BLUE GREEN

Only on

certain models

230V 1N~

H07RN-F 3x4 CEI-UNEL 35364

NL2L1

400V 2N~

H05RR-F 4x2.5 CEI-UNEL 35363

NL3L1L2

400V 3N~

H05RR-F 5x2.5 CEI-UNEL 35363

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Comentários a estes Manuais

Sem comentários

Indesit CISHB 10 A.1 IX Instruções de Utilização Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com não Indesit CISHB 10 A.1 IX